Stainless Steel Solutions provide wire rope and strand in a variety of different constructions and sizes.
Rope and Strand manufactured from high tensile, high quality AISI 316 welded stainless steel mesh grade 1.4401 in fully austenitic condition to give maximum corrosion resistance.
Dimensions and tensile grades conform to BS MA 29 which stipulates tolerances on nominal diameter and minimum tensile strength for wire sizes amd minimum breaking forces for strands and ropes.
Wire rope can be provided cut to length, as full reels or made up into assemblies to meet customer requirements.
Stainless steel wire mesh plain woven Stainless steel wire mesh twill woven Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter. Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter. |
| the mesh of stainless steel wire mesh from 2 mesh to 635 mesh, |
the wire diameter from 4.0mm to 0.02mm, width up to 3.5m. Stainless steel is wear-resisting,heat-resisting,acid-resisting and corrosion resisting.Just because of these characteristics,the wire mesh made of stainless steel is extensively used in mining, chemical ind. |
